|
| |
Aldan Eagle shock absorbers
are fully adjustable for both dampening and ride height. They can be
ordered with spring rates from 150 lbs. to 500 lbs. Aldan eagle shocks are
nitrogen charged, rebuildable and are guaranteed as long as you own your
car. They are available with bushing or bearing ends and for Custom Jag Cobra IRS Suspension,
Cobra suspensions, Quick change axles,
9 inch Ford suspensions.
| Part # |
Description (add
"B" for bearing model, "P" for polished body,
and "C" for chrome springs. |
| CW1090 |
11.6" open 8.9" closed |
| CW1091 |
13.4" open 10.8" closed |
| CW1092 |
15.0" open 11.8" closed |
| CW1093 |
16.5" open 12.0" closed |
| CW1094 |
Spanner Wrench |
|
 |
C.W.I. offers 4 styles of
rear tie bars: Regular steel, chromed, billet aluminum, and cobra design.
These tie bars are designed to fit to the rear of Jaguar suspensions and
C.W.I.'s 9" and Quick change
assemblies for added support.
| |
Description |
| CW1293 |
Billet Aluminum 9" Tie bar (not
pictured) |
| CW1294 |
Billet Aluminum Quickchange Tie bar
(not pictured) |
| CW1295 |
Jag Billet Aluminum Tie bar (Top) |
| CW1296 |
Jag Chromed Steel Tie bar (Second) |
| CW1297 |
Jag Cobra Tie bar (Third) |
| CW1298 |
Jag Regular Steel (Bottom) |
|
 |
C.W.I. offers these stainless
steel multi-angle adjusters, which are ideal for custom radius rods and
supports.
| Description (add
"P" for polished) |
| CW1305 |
Multi Angle Adjsuter, 5/8" |
| CW1306 |
Multi Angle Adjuster, 3/4" |
|
 |
C.W.I. offers these cast
aluminum rear covers to fit the Jag IRS Suspension. They seal better than the
original press-seal covers and the finned design allows for better cooling
of differential oil. They are available in polished or standard cast
finish and can be supplied with matching billet vent.
| Description (add
"P" for polished) |
| CW1137 |
Finned Alminum Rear Cover |
| CW1142 |
Billet Vent |
| CW1143 |
Rear Cover Bolt Kit |
|
 |
C.W.I. offers these UHMW
(ultra high molecular weight) poly non-squeak bushing kits. These bushings
have an extremely high abrasive property and are impact resistant. They
are used to replace the hard to find, difficult to install, and expensive
stock bearings in the lower arms.
| |
Description |
| CW1309 |
Inner Bushings |
| CW1310 |
Outer Bushings |
|
 |
C.W.I. offers these vented billet
hub greasers, which are a handsome and functional addition to the
outer hubs. These replace the stock plug and allow greasing of the
wheel bearings without wheel removal.
| Description |
| CW1324 |
Hub Greasers |
|
|
 |
|
